With Data becoming a major Asset in the Internet generation, it has been stored at locations called Data Centers. Managing the equipments which hold the Data is simple as they are accessible over the Internet. If you are aware of how electronic peripherals work esp. related to computers, you will know that every once in a while they malfunction and need to be rebooted. The problem is that in most cases these devices don’t respond so rebooting them in a conventional way is not possible. The only way to restart them would be power cycling the device. This would not be much problem if you have a manned Data Center or you have remote hands and eyes support. The problem is when you have a malfunctioning equipment at a place where there is no one to look after it. At such times, an IP PDU (Internet Protocol Power Distribution Unit) can be very helpful. This is a Power Strip which you can control over the Internet to power cycle devices plugged into it. In this article, we will look into how to use an Arduino YUN to make an IP PDU aka IP Power strip aka IP Power extension. The reason I am making this is because with Arduino YUN “I have got the Power”.
Web Controlled Power Strip using Arduino Yun and Yaler